Sunday, December 18, 2011

Hotwheels Custom JUN Mitsubishi Lancer Evo X

Thanks everyone for the waiting. I hope not to disappointing everyone either
Well, the most difficult part in the process are the masking for green stripe on the yellow color base on the both sides of the Evo X. It took 6 times masking on and off, spraying alternately in between.

The overall custom built lower skirting and rear GT wing kits are on experimantal stages and still not perfect yet especially on the GT wings with added brackets.

As for the side skirting and rear diffuser, i've added it to the Evo X and it's slightly not the same as the original JUN Evo X version.

The rear height of GT wing are raised up higher than the standard setting.

here's the completed custom JUN Evo X, enjoy...

 And the real JUN EVO X. sample pictures are courtesy from auto

Tuesday, December 13, 2011

Work In Progress Custom Hotwheels JUN Lancer Evolution X

Another custom Hotwheels Mitsubishi Lancer in the line, known as JUN Evo in Japan
and one of my favorite custom Evo X car.
here's the WIP as shown below.

sample pictures are courtesy from auto

And the casting are from Hotwheels 1/64 scales Mitsubishi Lancer Evo X
 The end rear spoiler cut off, some sanding applies to even the trunk surface.
 Next, scratch built custom GT wing, measured and place the frames in the holes which have been drilled.
 After the original paint stripped, fresh new primer coat and white spray paint applies.

 And some masking work on the green stripes, the pictures below are the finish coat.

Thanks for looking, will upload the complete custom JUN EVO later.