Wednesday, March 5, 2014

Winner Creepsterz Customizer Of The Year Build Off 2013 Hotwheels Marlboro Mad Manga Transporter Part 2

Here is the Part 2 of the Hotwheels scale 1/64 Custom Marlboro Mad Manga included with the WIP of the trucks and the mad manga.








Hotwheels Mad manga casting after removal of paint, works include cutting and sawing on the doors and front openable hood, others are custom engine parts and rear GT wing.




Truck are from Hotwheels Long Gone, The transporter are the most difficult to built, all start from scratch built. This is my first attempt building transporter with so many trial and error until it works smoothly. below are the plastic pvc sheet about 1.5mm thick, measured and cut out such as side panels, joined to the floor base supported and reinforced by cut out triangular wedges glued below and to inner side panes.

This is the surface floor base view.

The side panel are place over the rear side of the front truck for measurement before further works begin.

Both sides of the panels now are glue together, thus the body structure are more stronger now.

 Again, the repeat process of the bottom part reinforcement wedges completed

Another custom rear housing box that can hold and swapped wheels if need arise.

Thanks for looking.