Hotwheels Custom JUN Mitsubishi Lancer Evo X

Thanks everyone for the waiting. I hope not to disappointing everyone either

Well, the most difficult part in the process are the masking for green stripe on the yellow color base on the both sides of the Evo X. It took 6 times masking on and off, spraying alternately in between.

The overall custom built lower skirting and rear GT wing kits are on experimantal stages and still not perfect yet especially on the GT wings with added brackets.

As for the side skirting and rear diffuser, i've added it to the Evo X and it's slightly not the same as the original JUN Evo X version.

The rear height of GT wing are raised up higher than the standard setting.

here's the completed custom JUN Evo X, enjoy...

 And the real JUN EVO X. sample pictures are courtesy from auto otaku.com.

Work In Progress Custom Hotwheels JUN Lancer Evolution X

Another custom Hotwheels Mitsubishi Lancer in the line, known as JUN Evo in Japan
and one of my favorite custom Evo X car.
here's the WIP as shown below.

sample pictures are courtesy from auto otaku.com

And the casting are from Hotwheels 1/64 scales Mitsubishi Lancer Evo X

 The end rear spoiler cut off, some sanding applies to even the trunk surface.

 Next, scratch built custom GT wing, measured and place the frames in the holes which have been drilled.

 After the original paint stripped, fresh new primer coat and white spray paint applies.

 And some masking work on the green stripes, the pictures below are the finish coat.

Thanks for looking, will upload the complete custom JUN EVO later.

Hotwheels Custom 2011 Camaro BumbleBee

Here's my recent completed custom Bumblebee in the casting of 2011 Camaro.
The original rear wing was removed and the opening holes are filled up with some bonding material before spraying with primer coats and paints.
These are the 4th attempt in achieving the colour that similar to the replica bumblebee's camaro color.

Hotwheels Custom Power Up Surf Crate

It's been a long time that i've didn't update any custom works here due to too many works and deadlines had to finish. hope that my friends won't disappointed.
A few weeks ago, i've ask my friend to help me looking for this Hotwheels casting, it's a Surf Crate..
Looking at me and he was not so convincing.."it's surf crate and it's ugly."
and he ask me why and i told him that i want to custom it.
What do you guys think of it?

well here's the WIP.
the original casting was stripped paint and the doors are cutting out.Apart from the difficulties in cutting, the construction of the openable hinges for the Gull Wing type door are the most challenging task.
later, some paint applies.
and here it goes.

This is my first custom entry into international custom forum ( creepterz kustomz) competition and for the month of october casting are 1/64 scales Hotwheels Surf Crate. The level of customizing over there are high, skillful and awesome .To make it into top 5 are miracle.
And i've ended up finish 2nd placing.

Hotwheels Custom Barricade Ford Shelby GT500

Just complete this Hotwheels scales 1/64 Custom Barricade in the form of Ford Shelby GT500. Further upgrade to these with added custom built front protective bar, black co-mo wheels and others are improvement on the siren and front siren mounted on the bar and othres from the previous custom ford mustang.
enjoy.....