Thursday, September 3, 2009

Work In Progress Hotwheel Custom Spoon Civic 2001

Just started this custom although received this car last month. Yes, another custom civic s.i 2001 and this time is Spoon version as requested by YU5H and arttt_anime. The civic for art will be shown later stage. As i was aware, most of the time i didn't show my work of progress because as i work along with my custom in full attention and concentration and i didn't have some time to take photo. This time, i'll be showing my works in stages.
Here's the original civic S.i before custom works begins
After removing the casting using electric drill off the rivets on the base of the car, the casting now coated with paint remover.
after that, full hard sanding to casting. This is to smoothened the casting line especially on all four corners side which are visibly clear. It's tedious job,he!he!.......but need to apply or regret later!
When finish sanding (including soft sanding), i've apply some primer coat with spray works.
as for second day, another spray coat of yellow applies.
Update as works continue on 27th Aug.2009.
After overnight, i masked the casting and sprayed it over with white colour as base colour.
Another blue colour spray applies here.
When the blue colour dries, i've removed the masking and proceed to masking the front headlight and rear light by using my custom tools or known as scissor, cutter and tweezer. After that, i used small tiny brush tip to paint the front light and rear light.
As works continue:
updated as on 31st Aug 2009;
work continues as do some masking for airbrush on front air grilled intake bonnet. Others include rear wing masking also for air brush spray job.
this photo shown below are some portion of airbrush job is done
the masking has been removed, now can see in full front view.

and here's the the rear view,

well thats all for today. Still have some details to proceed and as work progress, it will take some time to complete.
Thanks for looking.

Stay tuned for the latest update.

10 comments:

  1. Danielh, definitely I will be waiting the final outcome of this project....

    ReplyDelete
  2. thanks for looking Mervin! will update my custom work soon!

    ReplyDelete
  3. That's a lot of work!
    I love custom diecast.

    Congrats!

    ReplyDelete
  4. thanks for looking brian! yeap, some lot of custom works here, hehe...!!! :-)

    ReplyDelete
  5. I too will be waiting for the final priduct to show for all to see.....great work in progress

    ReplyDelete
  6. Thanks Pydrummerboy for visit my blog!!
    Yes, it won't be long wait.

    ReplyDelete
  7. another project to look forward to...i'll be waiting for the final outcome. good luck! =)

    ReplyDelete
  8. thanks for looking jovet!!
    Will post my pictures soon.

    ReplyDelete
  9. He! He! Another civic project!! Sure got lots of civics on hand this chap! Good documentation on the project! no wonder there's no update on your blog. something big is comin' eh?

    ReplyDelete
  10. Hi there hacken! Haven't hear from you for quite some time.

    Yeap, some civics to custom right now and quite busy, hehe.....!! :-)

    ReplyDelete